DYNAMO strings for violin | Thomastik-Infeld Vienna

DYNAMO® strings for violin

They offer a broad sound AND an excellent response.
They have a wide dynamic range AND you can modulate sound colors all along to their full extent.
They sound great on most old AND most new instruments.
Their sound will blow away the musician AND the audience.

Ideally suited for

Orchestra players

Chamber musicians

Soloists

Why Thomastik-Infeld DYNAMO^® violin strings make you perform like you never have before

The DYNAMO^® set ^NO.DY100 combines qualities you usually can’t find in one set. We have developed this set of DYNAMO^® violin strings with lots of passion and patience. And the outcome is something that is even better than we dreamed of.

In addition to our set for violin (^NO.DY100), alternative violin strings are now also available – so you can tweak your sound a bit if you need to.
Also available: DYNAMO^® violin strings in two fractional size sets for ½ and ¾.

Click on the notes below to see detailed information.

4/4: NO. DY01 | included in set NO. DY100

Suitable for orchestra and solo performances, a bit darker in sound than the alternative string ^NO.DY01S.

Tension measurements based on a vibrating string length of 32.5 cm | 12.8’’

Technical Details

4/4: NO. DY01S | alternative string

Very soloistic string, more brilliant and brighter than the E-string (^NO.DY01) included in the set. Especially recommended for violins with a very low action on the E-string – they can benefit from the powerful sound of ^NO.DY01S E-string.

Tension measurements based on a vibrating string length of 32.5 cm | 12.8’’

Technical Details

3/4: NO. DY01 ¾ | included in set NO. DY100 ¾

Tension measurements based on a vibrating string length of 28.3 cm | 11.1’’

Technical Details

1/2: NO. DY01 ½ | included in set NO. DY100 ½

Tension measurements based on a vibrating string length of 28.3 cm | 11.1’’

Technical Details

4/4: NO. DY02 | included in set NO. DY100

Tension measurements based on a vibrating string length of 32.5 cm | 12.8’’

Technical Details

3/4: NO. DY02 ¾ | included in set NO. DY100 ¾

Tension measurement based on a vibrating string length of 30.5 cm | 12.0’’

Technical Details

1/2: NO. DY02 ½ | included in set NO. DY100 ½

Tension measurements based on a vibrating string length of 28.3 cm | 11.1’’

Technical Details

4/4: NO. DY03A | included in set NO. DY100

Has a smaller diameter and sounds more brilliant than our alternative aluminum D-string (^NO.DY03).

Tension measurements based on a vibrating string length of 32.5 cm | 12.8’’

Technical Details

4/4: NO. DY03 | alternative string

This aluminum D-string is recommended especially when you have trouble with a wolf tone on the G-string, or if you need to improve your instrument’s response. It is also good if you prefer less brilliance or a larger diameter than that of our silver D-string (^NO.DY03A) included in the set. You should also try this aluminum D-string if you like a bow sound that is more coarse-grained than the sound of our silver D-string.

Tension measurements based on a vibrating string length of 32.5 cm | 12.8’’

Technical Details

3/4: NO. DY03A ¾ | included in set NO. DY100 ¾

Tension measurement based on a vibrating string length of 30.5 cm | 12.0’’

Technical Details

1/2: NO. DY03 ½ | included in set NO. DY100 ½

Tension measurements based on a vibrating string length of 28.3 cm | 11.1’’

Technical Details

4/4: NO. DY04 | included in set NO. DY100

Broad range of sound colors and a balanced focus – easier to play than the alternative string ^NO.DY04B.

Tension measurements based on a vibrating string length of 32.5 cm | 12.8’’

Technical Details

4/4: NO. DY04B | alternative string

Even more sound colors and also a broader sound than the G-string (^NO.DY04) included in the set. However, it is also a bit more challenging to play. Recommended for very direct-sounding violins that need a lot of sound colors.

Tension measurements based on a vibrating string length of 32.5 cm | 12.8’’

Technical Details

3/4: NO. DY04 ¾ | included in set NO. DY100 ¾

Tension measurement based on a vibrating string length of 30.5 cm | 12.0’’

Technical Details

1/2: NO. DY04 ½ | included in set NO. DY100 ½

Tension measurements based on a vibrating string length of 28.3 cm | 11.1’’

Technical Details

COMPARE THE SOUND OF DYNAMO^® STRINGS TO OTHER THOMASTIK-INFELD VIOLIN STRINGS

We created this sound chart to make it easier for you to get an idea which of our strings are the right ones for your needs. But of course their sound can differ a bit depending on your instrument.

WANT TO KNOW MORE?

Download our brochure - including a scale where our DYNAMO® strings classify in terms of sound, sound beam, playability, break-in-time and sound colors.

Download
PDF